1-CH Ethernet Receiver Over two-wire Cable
* 1-CH Long Distance Ethernet Receiver
* Distance can be up to 6560ft(2km)
* Built-in TVS for surge protection
Overview
The MB-EU01AR is single channel Long Distance Ethernet Receiver which allows
transmission of Ethernet signal over two - wire cable such as UTP cat5/5e/6 cable
, telephone cable , etc . With super interference rejection and high-end TVS for surge
protection , the distance can be up to 6560ft( 2km )and Maximum Bandwidth can be up to
200Mbps when working with MB-EUO1AT Meanwhile , it also can transmit telephone
signal when transmitting Ethernet signal ( adding an additional splitter ) . it
allows any CCTV IP camera to be connected within extended distance The
MB-EU01AT/AR supports IP cameras up to 1000ft(300m) at the speed of 92Mbps and up to
6560ft( 2km ) at the speed of 25Mbps in a point-to-point configuration ,via two-wire cable .
The product works in pairs and the power consumption is low enough . The
Receiver is extremely simple to use , with no IP or MAC addressing required .
Applications
Campus, highways, airports,hotels,
Casinos ,commercial complexes,
remote parking lots, entry gates,
self - storage , hospitals ,
car - dealerships , prisons,
network connections
Features & Benefits
※ Connects IP camera to 10/100Base-T via single two-wire cable.
※ Can be up to 1000ft (300m) at the speed of 92Mbps
※ Supports 25Mbps up to 6560ft (2Km) via 26AWG
※ Built-in Surge Protection
※ Easy configuration, with no IP or MAC addressing required
|
Product Name |
1-CH Long Distance Ethernet Receiver Over Two-wire cable | |
|
Devices |
CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP | |
|
Standard supported |
IEEE 802.3 10BaseT,IEEE 802.3U 100Base-TX, IP ver 4 and 6. | |
|
Maximum Distance |
Distance |
Total transmission rate (max) |
|
1000ft (300m) |
92Mbps | |
|
1640ft (500m) |
84Mbps | |
|
2624ft (800m) |
47Mbps | |
|
3280ft (1km) |
42Mbps | |
|
6560ft (2km) |
25Mbps | |
|
RJ45 Ethernet Interface |
Connector |
RJ45 |
|
Wire type |
4-pair Cat5 or better | |
|
Speed |
10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over | |
|
Latency |
3mS | |
|
Power |
Power Adapter |
12VDC/1A |
|
Power Consumption |
1.2Watts | |
|
Leds indicator |
Green Led |
Two-Wire connect |
|
Yellow Led |
Network Signal communication | |
|
Surge Protection |
2KV(different-mode), 4KV(common-mode) | |
|
Temperature |
Operating: 0° to 60°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing | |
|
Enclosure |
Aluminum alloy | |
|
Dimensions(packaging) |
||
|
Weight(packaging) |
||
Typical Application
