中文版|English
Home >> Products >>

4-CH Ethernet Receiver Hub Over coax

MB-EC04AR MB-EC04AR
Model:MB-EC04AR

*4-CH Ethernet Receiver Hub Over Coax

*Distance can be up to 6560ft(2km)

*Physical Bandwidth can be up to 200Mbps

*Built-in TVS for surge protection
To Purchase Products
Product Information:

  

Overview

  The  MB - EC04AR  is   4-CH   Ethernet   Signal    Receiver  Hub  that   can

   Receive  Four   Channel  10/100   Base - T   Ethernet   signal  from  remote

   IP  cameras  or  other  Ethernet   Devices   over   coax    cable ,at the sane

   time . it   allows   four   CCTV   IP cameras or other Ethernet  Devices to be

   connected  within  extended  distance  .  With  super  interference rejection

   and  high - end  TVS  for  surge  protection  ,  the   MB-EC04AR   supports

   Ethernet  Signal   to   be   transmitted  up  to 1000ft( 300m ) at the speed of 

   92Mbps   and up to  6560ft ( 2km )  at  35Mbps  ,  in  any  harsh   electrical

   areas  .  the device  is  often used  in  legacy   installations  where  existing

   cable   is   re-deployed   as   part  of   an   upgrade  to IP cameras or other

   Ethernet  Devices  .

   MB-EC04AR can work  with  four  MB-EC01AT at the same  time   and  the

   power   consumption is  low  enough .The  transmitter is extremely simple to

   use , with no IP or MAC addressing required.

   

Applications

Campus, highways, airports,hotels,

Casinos   , commercial  complexes,

Remote parking  lots, entry gates,

Self - storage    ,     hospitals,

Car  dealerships     ,    prisons,

Network  connections

  

 Features & Benefits

 

Receiver 4-CH Ethernet Devices at the same time

10/100 Base-T Full Duplex Ethernet can be up to 6560ft(2km)

Easy configuration, with no IP or MAC addressing required

Built-in Multistage Surge Protection     

Built-in Multistage overcurrent and overvoltage protection

Built in LED indicators for network signals, link status & power

Preserve investment in coax infrastructure

Network connections in harsh electrical areas

 

 Specifications

 

 

Product Name

4-CH Ethernet Receiver Hub Over coax

Devices

CCTV IP cameras, NVR, IP encoders, network switches and any device with a

10/100Mb/s Ethernet port, supporting IP

     Standard supported

IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6.

Maximum Distance

Distance

Total transmission rate (max)

1000ft (300m)

92Mbps

1640ft (500m)

86Mbps

2624ft (800m)

54Mbps

3280ft (1km)

45Mbps

6560ft (2km)

35Mbps

RJ45 Ethernet Interface

Connector

RJ45

Wire type

4-pair Cat5 or better

 Distance

up to 328ft (100m)

Speed

10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over

Latency

  3mS

coax cable Interface

Connector

BNC, RG-59/U or similar

Impedance

75Ω

Power

Power Adapter

12VDC/1A

Power Consumption

1.6 Watts (Max)

Leds indicator

Red Led

Power

Green Led

coax cable connect

Yellow Led

Network Signal communication

Surge Protection

2KV(different-mode), 4KV(common-mode)

Temperature

Operating: 0° to 60°C

Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure

Aluminum alloy

Dimensions(packaging)

Weight(packaging)

 

Typical Application

 

     

Links:

Copyright © ShenZhen Muxboxs Science & Technology Co.,Ltd

All Rights Reserved 粤ICP备12018293号