1-CH Ethernet&Power Receiver Over Coax
＊1-CH Ethernet&Power Receiver Over Coax
＊Ethernet Transmission up to 6560ft(2km)
48VDC Power Transmission up to 2624ft(800m))
＊Physical Bandwidth can be up to 200Mbps
＊Built-in TVS for surge protection
Overview
The MB-ECP01AR is single channel long distance Ethernet&Power Signal Receiver that
can receive 10/100 Base-T Ethernet signal to the Transmitter, and deliver 48V power to
the transmitter ,at the same time . it allows any CCTV IP camera or other Ethernet Devices
to be connected within extended distance without extra power. With super interference
rejection and high-end TVS for surge protection , the MB-ECP01AR supports Ethernet
Signal to be transmitted up to 1000ft( 300m ) at the speed of 92Mbps and up to
6560ft ( 2km ) at 35Mbps , Power transmission up to 2624ft( 800m ) , in any harsh
electrical areas . the device is often used in legacy installations where existing
cable is re-deployed as part of an upgrade to IP cameras or other Ethernet
Devices . MB-ECP01AR working with MB-ECP01AT ,it can transmitte Ethernet &Power
up to 6560ft( 2km ) . and the power consumption is low enough .The transmitter is
extremely simple to use , with no IP or MAC addressing required.
Applications
Campus, highways, airports,hotels,
Casinos , commercial complexes,
Remote parking lots, entry gates,
Self - storage , hospitals,
Car dealerships , prisons,
Network connections
Features & Benefits
※ 1-CH Ethernet &Power long distance Receiver Over Coax
※ 10/100 Base-T Full Duplex Ethernet can be up to 6560ft(2km).
※ Deliver 48V Power to transmitter
※ Easy configuration, with no IP or MAC addressing required .
※ Built-in Multistage Surge Protection.
※ Built-in Multistage overcurrent and overvoltage protection
※ Built in LED indicators for network signals, link status
※ Preserve investment in coax infrastructure
※ Network connections in harsh electrical areas
Specifications
|
Product Name |
1-CH Ethernet &Power long distance Receiver | ||
|
Devices |
CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP | ||
|
Standard supported |
IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6. | ||
|
Maximum Distance |
Distance |
Total transmission rate (max) |
Power ( Output For Devices ) |
|
1000ft (300m) |
92Mbps |
24 Watts(Max) | |
|
1640ft (500m) |
86Mbps |
13.9Watts(Max) | |
|
2624ft (800m) |
54Mbps |
8.6Watts(Max) | |
|
3280ft (1km) |
45Mbps |
NA | |
|
6560ft (2km) |
35Mbps |
NA | |
|
RJ45 Ethernet Interface |
Connector |
RJ45 | |
|
Wire type |
4-pair Cat5 or better | ||
|
Distance |
up to 328ft (100m) | ||
|
Speed |
10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over | ||
|
Latency |
3mS | ||
|
coax cable Interface |
Connector |
BNC, RG-59/U or similar | |
|
Impedance |
75Ω | ||
|
Power |
Power |
Powered via coax cable | |
|
Power Consumption |
1.2 Watts(Max) No external supply required | ||
|
12VDC Output For Devices |
24 Watts (Max) | ||
|
Leds indicator |
Green Led |
coax cable connect | |
|
Yellow Led |
Network Signal communication | ||
|
Surge Protection |
2KV(different-mode), 4KV(common-mode) | ||
|
Temperature |
Operating: 0° to 60°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing | ||
|
Enclosure |
Aluminum alloy | ||
|
Dimensions(packaging) |
|||
|
Weight(packaging) |
|||
