1-CH Ethernet Transmitter over coax
＊1-CH Ethernet Over Coax Extender
＊Distance can be up to 6560ft(2km)
＊Physical Bandwidth can be up to 200Mbps
＊Built-in TVS for surge protection
Overview
The MB-EC01AT Ethernet Extender is a Active Long Distance Ethernet Transmitter
that allows 10/100 Base-T Ethernet signal to be transmitted over a single 75-ohm
coax cable .it allows any CCTV IP camera or other Ethernet Devices to be connected
within extended distance . With super interference rejection and high-end TVS for
surge protection , the MB-EC01AT supports Ethernet Signal to be transmitted up to
1000ft( 300m ) at the speed of 92Mbps and up to 6560ft (2km) at 35Mbps , in any
harsh electrical areas . the device is often used in legacy installations where
existing cable is re-deployed as part of an upgrade to IP cameras or other
Ethernet Devices .
MB-EC01AT can work with MB-ECO1AR or MB-EC04AR and the power consumption
is low enough . The transmitter is extremely simple to use , with no IP or MAC
addressing required.
Applications
Campus, highways, airports,hotels,
Casinos , commercial complexes,
Remote parking lots, entry gates,
Self - storage , hospitals,
Car dealerships , prisons,
Network connections
Features & Benefits
※ Connects IP camera to 10/100Base-T over single coax cable
※ 10/100 Base-T Full Duplex Ethernet can be up to 6560ft(2km).
※ Easy configuration, with no IP or MAC addressing required .
※ Built-in Surge Protection.
※ Preserve investment in coax infrastructure
※ Network connections in harsh electrical areas
Specifications
|
Product Name |
1-CH Long Distance Ethernet Transmitter over coax | |
|
Devices |
CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP | |
|
Standard supported |
IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6. | |
|
Maximum Distance |
Distance |
Total transmission rate (max) |
|
1000ft (300m) |
92Mbps | |
|
1640ft (500m) |
86Mbps | |
|
2624ft (800m) |
54Mbps | |
|
3280ft (1km) |
45Mbps | |
|
6560ft (2km) |
35Mbps | |
|
RJ45 Ethernet Interface |
Connector |
RJ45 |
|
Wire type |
4-pair Cat5 or better | |
|
Distance |
up to 328ft (100m) | |
|
Speed |
10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over | |
|
Latency |
3mS | |
|
coax cable Interface |
Connector |
BNC, RG-59/U or similar |
|
Impedance |
75Ω | |
|
Power |
Power Adapter |
12VDC/1A |
|
Power Consumption |
1.6 Watts (Max) | |
|
Leds indicator |
Green Led |
coax cable connect |
|
Yellow Led |
Network Signal communication | |
|
Surge Protection |
2KV(different-mode), 4KV(common-mode) | |
|
Temperature |
Operating: 0° to 60°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing | |
|
Enclosure |
Aluminum alloy | |
|
Dimensions(packaging) |
||
|
Weight(packaging) |
||
Typical Application
