1-CH Component Video/IR Balun
*1-CH Component Video/IR Sigal Transmission
*Supports 480i/p up to 1,000ft(305m) via Cat5e/6
*Built-in TVS Protection
*Cost-efficient cabling
*Quicker moves, adds and changes
Overview
The Component Video/IR Balun( MB-COVIRB) that allows one Component
Video , one IR emitter signal to be transmitted Via Cat5e/6 Cable over sigle
cat5e/6 cable.Support 480i/p Component Video up to 1000ft ( 305m ) , 720p
or 1080i Component Video up to 500ft ( 152m) ,in a point-to-point connection.
it is built in surge suppressor to protect Video and Audio equipment against
damaging voltage spikes . The product is designed for classroom video
distribution , commercial and home video / IR systems ,hospital video training ,
video conferencing , and video kiosks Boardroom systems and so on.Used in
pairs , the Component Video supports 480i/p,720p and 1080i/p video formats.
the Video / IR Balun eliminates costly and bulky coaxial cable, allowing Video/
audio equipment to be connected or moved within a structured cabling
environment.
Applications
classroom video distribution, commercial and
home video / IR systems , hospital video
training, video conferencing, and video kiosks
Boardroom systems , classroom training ,
auditoriums , custom home installations and
intercom systems.
Features & Benefits
※Supports 480i/p, 720p, 1080i/p video formats
※Supports 480i/p up to 1,000 ft (305m) via Cat5e/6
※Supports 720p/1080i up to 500ft(152m) via Cat5e/6
※Built-in TVS protection
※Quicker moves, adds and changes
Quick Setup Guide
Plug the Component Video RCA(Red,Green,Blue) connectors of the transmit
Balun into the Component Video output of the source component in order.
Attach your 2 wire powered IR output distribution signal to the 2 conductor
screw terminal on the transmit Balun . Plug the Video RCA connectors from
the receive Balun into your desired input component . Attach your 2 wire IR
emitter to the 2 conductor screw terminal on the receive Balun. Make sure
that you follow the polarity recommended by your IR manufacturer. Secure
the IR emitter to the component you wish to control. Insert the CAT5 cable
into both ends of the Baluns. You may use standard EIA 568A/B termination.
Specifications
|
Product Name |
1-CH Component Video/IR Balun |
|
Devices |
DVD players, VCR, satellite receivers, MPEG players, laptops, notebooks,monitors, DLP projectors, CCD cameras, video switchers, sequencers, digital video servers, video multiplexers, video splitters, video converters and other composite video equipment. |
|
Transmission |
Transparent to the user. |
|
Bandwidth |
Video: 60 MHz, 3 dB roll off |
|
Maximum Input |
1.1Vp-p |
|
Insertion Loss per Pair (Video) |
0.1 dB for 0.1 MHz |
|
Max. Distance Color via |
480i/p: 1,000 ft (305 m) |
|
Cable:Cat 5E/6 UTP/STP |
24 AWG or lower solid copper twisted pair wire |
|
Cable: Coax |
Impedance: 75 ohms at 1 MHz |
|
Connectors |
Three RCA-F connectors: Green (Y), Blue (Pb), Red (Pr) |
|
Pin Configuration |
Red (Pr): Pins 7(R) & 8(T) Green (Y): Pins 3(R) & 6(T) |
|
Temperature |
Operating: 0° to 55°C |
|
Enclosure |
Aluminum alloy |
|
Dimensions(packaging) |
7.5*26*151mm (including one pair of Balun) |
|
Weight(packaging) |
175g |
