4-CH Ethernet &Power signal Receiver Hub Over Cat5e/6 Cable
*4-CH Ethernet&Power Receiver Hub Over Cat5e/6 cable
*transmission distance up to 32800ft(1km)
*Deliver Maximum 48V3A DC Power to Transmitter
*Physical Bandwidth can be up to 200Mbps
*Built-in Multi-stage TVS for surge protection
Overview
The MB-EUP04AR is four channel Long Distance Ethernet &Power signal Receiver Hub which
can receive four channel 10/100 Base-T Ethernet signal from remote IP cameras or other
Ethernet Devices , and deliver power to the remote devices over cat5e/6 cable , at the same time.
With super interference rejection and high-end TVS for surge protection , the distance can be up
to 3280ft( 1km ) and maximum Bandwidth can be up to 200Mbps.Meanwhile,it can deliver 48VDC
power to transmitter.it allows any CCTV IP camera or other ethernet devices to be connected within
extended distance . The MB-EUP04AR supports Ethernet Devices up to 1000ft(300m) at the speed
of 92Mbps and up to 3280ft(1km) at 25Mbps,via cat5e/6 cable.The product works with MB-EUP01AT
and the power consumption is low enough.The receiver is extremely simple to use,with no IP or MAC
addressing required.
Applications
Campus, highways, airports,hotels,
Casinos , commercial complexes,
Remote parking lots, entry gates,
Self - storage , hospitals, Car dealerships ,
prisons, Network connections
Features & Benefits
※ 4-CH Ethernet &Power long distance Receiver Hub
※ 10/100 Base-T Full Duplex Ethernet can be up to 3280ft(1km).
※ Deliver Maximum 48V3A DC Power to transmitter
※ Easy configuration, with no IP or MAC addressing required .
※ Built-in Multi-stage Surge Protection.
※ Built-in Multistage overcurrent and overvoltage protection
※ Built in LED indicators for network signals, link status
※ Network connections in harsh electrical areas
Specifications
|
Product Name |
4-CH Ethernet &Power Receiver Hub Over cat5e/6 cable | ||
|
Devices |
CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP | ||
|
Standard supported |
IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6. | ||
|
Maximum Distance |
Distance |
Total transmission rate (max) |
Power (Output For Devices ) |
|
1000ft (300m) |
92Mbps |
18Watts(Max) | |
|
1640ft (500m) |
86Mbps |
13.9Watts(Max) | |
|
2624ft (800m) |
47Mbps |
8.6Watts(Max) | |
|
3280ft (1km) |
45Mbps |
5.5Watts(Max) | |
|
RJ45 for Ethernet Interface |
Connector |
RJ45 | |
|
Wire type |
4-pair Cat5 or better | ||
|
Distance |
up to 328ft (100m) | ||
|
Speed |
10/100Base-T,half/full duplex, auto-negotiation auto MDI/MDIX cross-over | ||
|
Latency |
3mS | ||
|
RJ45 for Link Interface |
Connector |
RJ4 | |
|
Wire type |
4-pair Cat5 or better | ||
|
Distance |
up to 3280ft (1km) | ||
|
Power |
Power |
Input |
100VAC-264VAC |
|
Output |
48V/3A DC | ||
|
Power Consumption |
1.2Watts(Max) No external supply required | ||
|
Leds indicator |
Power Led |
Power station | |
|
Green Led |
Cat5e/6 cable connect | ||
|
Yellow Led |
Network Signal communication | ||
|
Surge Protection |
2KV(different-mode), 4KV(common-mode) | ||
|
Temperature |
Operating: 0° to 60°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing | ||
|
Enclosure |
Aluminum alloy | ||
|
Dimensions(packaging) |
|||
|
Weight(packaging) |
|||
Typical Application